- -
5
1.
GENERAL
CHARACTERISTICS
The Anemometer Model
HD2303.0
is a portable instrument that allows to perform measurements in
the fields of air conditioning, heating and ventilation.
It is fitted with a large LCD display for excellent visualization of the measured data. The
Anemometer Model
HD2303.0
:
•
uses hot-wire or vane probes to measure
air speed
,
flow rate
, and
temperature
inside pipelines
and vents;
•
while
temperature
only is measured by immersion, penetration or contact probes; the
temperature sensor is either a Pt100 or Pt1000.
The probes are fitted with the
automatic detection
module, with the factory calibration settings
already being memorized inside.
The units of measurement for the measurable quantities are:
•
for wind speed:
-
m/s (meter/second)
-
km/h (kilometer/hour)
-
ft/min (foot/minute)
-
mph (mile/hour)
-
knot
•
for calculated flow rate:
-
l/s (liter/s)
-
m³/s (cubic meter/second)
-
m³/s (cubic meter/minute)
-
m³/h (cubic meter/hour)
-
ft³/s (cubic foot/second)
-
ft³/min (cubic foot/minute)
Using the Max, Min and Avg function of this instrument respectively obtains the maximum,
minimum or average values.
Other available functions are:
•
the relative measurement REL;
•
the HOLD function;
•
the automatic turning off which can also be disabled.
For further details see chapter 2.
