Delta OHM HD 8706-R1, Instruction Manual

Page: 6 / 24

ENGLISH
– 24 –
KEY SYMBOLS LIT
BESIDES
THE NUMBERS
FUNCTION DESCRIPTION
REL
disappears
RCD
B flashes
RCD + B
disappear
Indicates
unit chosen
(µS, °C, °F)
Max µS (or °C or °F)
Min µS (or °C or °F)
Updated value
When the key is pressed again the instru-
ment returns to normal functions.
MAX/MIN storage key.
The maximum/minimum recording starts
from the moment the REC, MIN, MAX
key is pressed (the RCD symbol
appears).
When the key is pressed again the RCD
symbol disappears and the maximum and
minimum values are no longer updated.
The maximum and minimum are recorded
for both conductivity and temperature.
During RCD mode the AUTO POWER
OFF function is disabled and the B sym-
bol flashes.
Press the DATA CALL MIN/MAX key to
read the recorded values.
*
The data recorded remain in the memo-
ry even if the RCD mode is abandoned
(the values can be read later). Howev-
er, when the instrument is switched off
or RCD is started again, the previous
MAX/MIN values are erased.
*
When RCD MAX, MIN is pressed dur-
ing REL, the maximum and minimum
values of Dx are memorized instead of
the relative values.
Key for recalling the maximum and mini-
mum. Whenever this key is pressed the
indication on the display varies in the
order shown below.
Maximum value.
Minimum value.
Value measured at that moment.