DELTA GROUP EnOcean O3-DIN Application Manual Download Page 40

Page: 40 / 43

Appendix B: FIL EEP Profiles

The 4.13 firmware includes 27 predefined FIL object EEP profiles.

Many EnOcean devices use EEP profiles that are not included in the predefined FIL objects.
These untested devices may or may not work with the gateway. Additional tested profiles may
be available on

support.deltacontrols.com/Products/EnOceanEEPs

The following table contains a list of the FIL EEP profiles that are included with the EnOcean
gateway.

EEP

FIL

Application

Device Example

A5-02-05

1201

Temperature sensor

Echoflex MT-17

Echoflex RTS-1T-UW
sensors

Thermoken SR65

Thermoken SRC-D0

A5-02-17

1202

Outdoor temp sensor

Thermokon SR65

A5-04-01

1203

Temp and humidity
sensors

Echoflex RTS-1H-
UW sensors

Thermokon SR04-RH

A5-07-01

1204

Occupancy sensor

ILLUMRA E3x-x12GP

Echoflex ERM-DL

Thermokon SRC-D0
(Heating and/or
cooling application)

A5-08-01

1205

Light, temp, humidity
and occupancy
sensor

Thermokon SRC-D0
(Heating and/or
cooling, humistat, and
lighting control)

A5-09-04

1206

CO2 sensor

Thermokon SR04 C02

A5-10-01

1207

Temp, SP, FS, OCC

Thermokon SR04PST

A5-10-03

1208

Temp and SP sensors

Echoflex RTS-1TS-UW

O3-DIN EnOcean Application Guide

Edition 1.0

Summary of Contents for EnOcean O3-DIN












































Search results

Summary of Contents for EnOcean O3-DIN

Reviews:

Related manuals for EnOcean O3-DIN

Brands by name

Popular brands

DELTA GROUP EnOcean O3-DIN, Application Manual

Search results

Summary of Contents for EnOcean O3-DIN

Reviews:

Related manuals for EnOcean O3-DIN

Brands by name

Popular brands