Modbus TCP Remote I/O Communication Module RTU-EN01
DVP-PLC Operation Manual
1
Introduction
3
This operation manual only provides introductory information on electrical specification, installation and wiring.
3
RTU-EN01 is an OPEN-TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity,
electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g. key
or specific tools are required to open the enclosure) in case danger and damage on the device may occur. DO NOT
touch any terminal when the power is switched on.
3
Please read this manual carefully and follow the instructions to avoid damage on the product or harm on staff.
Table of Content
1
INTRODUCTION .................................................................................................................... 3
1.1
Features ......................................................................................................................................3
1.2
Specifications ..............................................................................................................................3
2
PRODUCT PROFILE & OUTLINE ......................................................................................... 4
2.1
Dimension ...................................................................................................................................4
2.2
Product Profile.............................................................................................................................5
2.3
LED Indicators.............................................................................................................................5
2.4
RUN/STOP Switch ......................................................................................................................6
2.5
RJ-45 PIN Definition....................................................................................................................6
2.6
RS-232 PIN Definition .................................................................................................................6
2.7
RS-485 PIN Definition .................................................................................................................6
3
INSTALLATION & WIRING.................................................................................................... 6
3.1
Connecting RTU-EN01 to DVP Slim Series Digital Input/Output Module....................................6
3.2
Installing RTU-EN01 and DVP Slim Series Digital Input/Output Module onto DIN Rail ..............7
3.3
How to Connect RTU-EN01 to Network ......................................................................................7
4
WORD DEVICES & BIT DEVICES IN RTU-EN01 ................................................................. 8
4.1
Basic Registers (BR)...................................................................................................................8
4.2
Explanations on BR.....................................................................................................................9
4.3
External Input Contacts (RX).....................................................................................................12
4.4
External Output Contacts (RY)..................................................................................................12
4.5
Control Register for Extension Modules (RCR).........................................................................12
4.6
Word Devices & Bit Devices for Timers (T) ...............................................................................13
4.7
Word Devices & Bit Devices for Counters (C)...........................................................................14
4.8
Bit Devices for Real-Time Clock (R)..........................................................................................14
5
MODBUS COMMUNICATION ............................................................................................. 15
5.1
Function Codes Supported .......................................................................................................15
5.2
Exception Codes Supported .....................................................................................................15
5.3
Device Type & Device Address .................................................................................................16
