- 1 -
ΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞ
ENGLISH
ΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞΞ
Thank you for choosing Delta DVP series PLC. DVP04PT-S is able to receive 4 points of
platinum temperature sensors (PT 100 3-WIRE 100
ȍ
3850 PPM/°C (DIN 43760 JIS
C1604-1989)) and convert them into 14-bit digital signals. Besides, through FROM/TO
instructions in DVP Slim series MPU program, the data in DVP04PT-S can be read and
written. There are 49 16-bit control registers (CR) in DVP04PT-S. The power unit is
separate from it and is small in size and easy to install. DVP04PT-S displays
temperatures in both Celsius (resolution: 0.1°C) and Fahrenheit (resolution: 0.1°F).
a
Please read this instruction sheet carefully before use.
a
This is an OPEN TYPE I/O module and therefore should be installed in an enclosure
free of airborne dust, humidity, electric shock and vibration. The enclosure should
prevent non-maintenance staff from operating the device (e.g. key or specific tools
are required for operating the enclosure) in case danger and damage on the device
may occur.
a
DO NOT apply AC power to any of the input/output terminals, or it may damage
DVP04PT-S.
a
DO NOT touch any terminal when the power is switched on.
a
Make sure that the DVP04PT-S is properly grounded
, to prevent any
electromagnetic noise.
a
Please keep the wires as short as possible when connecting RTD to PLC and keep
power lead as far away as possible from I/O wires to prevent noise interference.
Product Profile & Dimension
90.00
4.00
3.00
25.20
1
2
3
4
5
Ʌ
FG
L+
L-
I+
C
H
1
C
H
2
C
H
3
C
H
4
Ʌ
FG
L+
L-
I+
FG
L+
L-
I+
FG
L+
L-
I+
60.00
6
7
8
9
3
10
11
12
13
90.00
3.00
3.4
60.00
14
[ Figure 1 ]
Unit: mm
1. Status indicator (POWER, RUN and ERROR)
8. I/O module connection port
2. Model name
9. I/O module clip
3. DIN rail clip
10. DIN rail (35mm)
4. I/O terminals
11. RS-485 communication port
5. I/O point indicator
12. I/O module clip
6. Mounting holes
13. DC power input
7. Specification label
14. I/O module connection port
I/O Terminal Layout
L-
L+
FG
L-
L+
DVP04PT-S
FG
I-
L+
FG
I-
L-
L+
FG
I-
L-
I-
