- 4 -
- 4 -
Installing and mounting the products
1
1.1 CS 2000 TYXAL+ control unit
• Location
The alarm control unit should be installed:
- On a fl at surface, with enough space all around for installati on and
opening the batt ery cover.
- In the centre of the system and fi tt ed in a high positi on to obtain the
best radio link (avoid basements).
- In an open area to obtain the best dispersion of sound for the inte-
grated siren.
- In a place diffi cult to locate by an intruder but easily accessed by the
user.
- In an area protected by an infrared moti on detector.
- At least 2 metres away from any other wireless transmitt er
• Mounting
1
2
1
Remove protecti ve tab
Unscrew
Separate the base from the rest of the siren
by pushing up and pulling toward you.
Separate the control
unit from the base.
Separate the parts
Incorrect
Correct
Incorrect
Correct
- 5 -
1
2
C
B
A
D
!
B
B
A
C
D
2
Mark and drill holes
(A, B, C and D)
Fit the mount (screws A and B) to
the wall (do not fi t screws C and D
at this point).
Fit the base back on to the mounti ng bracket
and secure it with the screws (C and D).
=
Tamper alarm on opening. Important: do not damage this part of the
support (required for the tamper alarm). Screw back with care.
Fit the mounti ng bracket
Lithium battery
Bloc pile 2x3.6V, LSH 20
ref. 6416222
3
Connect the batt ery unit
1.2 CLT 8000 TYXAL+ touch screen key-
pad
• Location
It is advisable to install the touch screen keypad:
- inside,
- near one of the main entrances, if possible protected by an intrusion
detector (e.g. DMB TYXAL+),
- The user must have easy access and it can be mounted on a wall at a
height of 1.50 m,
- Avoid proximity with metal surfaces or an electrical switchboard.
Important: if the touch screen keypad is protected by a detector (door/
window or moti on), you must use a delayed triggering for the detec-
tor when acti vati ng it.
• Mounting
❶
Separate the 2
parts of the unit.
❷
Mark and drill holes D1, D2 and D3.
Mount the base using screws V1, V2 and V3.
!
Do not damage or lose the rubber part
C
(required for the tamper alarm).
1
2
!
UP
HAUT
!
C
1
V1
V2
V3
D3
D2
D1
Lithium battery
3 x LS 14500 3,6 V
2
3
Ø max = 3 mm
❸
Fit the batt ery unit, observing the right
polarity.
Close and lock the unit.
~1,50
m
