From Step 5
Desde el paso 5
STEP 6
PASO 6
18
Parts and tools required to complete step
Piezas y herramientas necesarias para completar este paso
1. Attach the assembly from step 3 to
the assembly from step 5 using (2)
M6 x 55 mm Bolts (Part S) and (2)
M6x13 mm Barrel Nuts (Part V).
Tighten with the M4 Allen Wrench. Use
the Flat Head Screwdriver to hold the
Barrel Nut in the proper alignment.
2. Attach the Center Cross Slat (Part
K) to the assembly from step 3 using
(1) M6 x 25 mm Bolt (Part U). Tighten
with the M4 Allen Wrench.
DO NOT Tighten the bolts at this
time, they should be loose.
M4 Allen Wrench (included)
Llave Allen M4 (incluido)
1. Fije la pieza del paso 3 a la pieza del
paso 5 utilizando (2) pernos M6x55 mm
(Pieza S) y (2) tuercas Cilíndricas M6x13
mm (Pieza V). Apriete todos los pernos
utilizando la Llave Allen M4. Utilice el
destornillador de cabeza plana para
sostener la tuerca Cilíndrica en la
alineación adecuada.
2. Fije la Listón cruzado central (Pieza K) a
la pieza del paso 3 utilizando (1) perno M6
x 25 mm (Pieza U). Apriete todos los
pernos utilizando la Llave Allen M4.
NO apriete los pernos en este punto,
deben quedar sueltos por ahora.
From Step 3
Desde el paso 3
U
M6 x 25 mm Bolt x 1
Perno M6 x 25mm x 1
V
M6 x 13mm Barrel Nut x 2
Tuerca Cilíndrica M6x13mm x 2
S
M6 x 55 mm Bolt x 2
Perno M6 x 55mm x 2
Summary of Contents for Logan W103240-374
Page 3: ...3 A S S E M B L Y I N S T R U C T I O N S I N S T R U C C I O N E S D E M O N T A J E...
Page 15: ...15 A S S E M B L Y I N S T R U C T I O N S I N S T R U C C I O N E S D E M O N T A J E K U...
Page 17: ...17 A S S E M B L Y I N S T R U C T I O N S I N S T R U C C I O N E S D E M O N T A J E D L x 7...