OPERATING INSTRUCTIONS
MATCH LIGHTING INSTRUCTIONS:
If spark igniter will not light the burners, the burners can be lit manually using a lit long match,
taper or BBQ lighter.
1.
Push and turn the knob counter-clock-wise to the biggest flame marking on the bezel.
2.
Insert a lit match or BBQ lighter thru the grates and near the top of the burner. Once you
see or hear a flame you can release the knob.
Important
: If burner fails to light within 4 seconds, turn off gas and wait 5 minutes before
repeating the process.
Warning
: If you smell gas, shutoff the gas supply and immediately check for leaks using the
soapy water technique. (See Page 6)
CLEANING & MAINTENANCE
STAINLESS STEEL
The DELSOL Side Burner is made of all welded stainless steel. It is non-rusting and non-
magnetic. Never clean the stainless steel when it is hot. After the initial use, certain areas of the
side burner may discolor. This is a normal discoloration caused by the intense heat given off by
the burners. Specks of grease can gather on the surface of the stainless steel and get baked-on.
These can be removed by using a mild abrasive pad (like Scotch Brite) with a stainless steel
cleaner. Use the mildest cleaner and always scrub in the direction of the grain.
Do not use steel wool to clean the side burner. Do not use abrasives on the polished
highlights. Be extra careful when cleaning around the highlights. Metal polisher or mild chrome
cleaner can be used to bring back the luster on highlights. To touch-up minor scratches in the
stainless steel, sand the affected surface very lightly, with 100-dry grit emery sandpaper in the
direction of the grain.
SPIDER AND INSECT WARNING
Spiders and other insects can nest in the burners of this and any other side burners,
which causes the gas to flow from the front of the burner. This dangerous “condition” can
cause a fire behind the valve panel, damaging the side burner and making the side burner
unsafe to operate. Inspect the burners once a year or if the side burner has not been used for
more than one month or if any of the following conditions occur:
1)
The smell of gas in conjunction with the burner flames appearing yellow.
2)
The side burner does not reach temperature.
3)
The side burner heats unevenly.
4)
The burners make popping noises.