SKYFi
TM
Audio System Set-Up
Your SKYFi
TM
Audio System Kit contains the following components:
Set-up your SKYFi
TM
Audio System as follows:
1. Connect the supplied 12V
DC power adapter to the
socket on the rear of the Audio
System, and the other end to a
wall outlet.
2. Connect the XM Antenna to the antenna jack located
inside the battery and antenna cable storage compart-
ment located on the bottom of the Audio System. The
cover must first be removed by pressing down on the
two tabs with your thumbs and then sliding away from
the front of the Audio System. The antenna cable can
either be completely wound around the tabs in the
compartment, leaving just enough cable to attach
the antenna to the four tabs on the back
of the Audio System, or the entire 20 foot
cable can be used to position the
antenna away from the Audio System for
better reception. Lining up all six tabs and
then sliding the panel towards the front of
the unit until a click is heard will reattach
the panel. Make certain that all six tabs
are engaged and the rear of the panel is
aligned with the rear cover.
Battery compartment and
antenna cable storage
4
12V. DC jack
12V. DC Adaptor
Antenna
