4. You can remove a mount attached with an
adhesive pad by taking the following steps:
• Lift one edge of the adhesive pad
gently with fingers or the rounded
edge of a spoon. Once enough of the
edge is loosened to grip with your
fingers, pull the pad gently from the
mounting surface at a 90-degree
angle. Avoid using sharp tools that
could damage the surface.
• If the pad fails to loosen, warm it
with a hair dryer for 2-3 minutes to
soften the adhesive. Be careful not
to apply too much heat, which could
damage the mounting surface.
• If any adhesive remains on the surface,
it can easily be removed by rubbing
your thumb or finger across it.
Delphi XM SKYFi Marine Kit
Limited Consumer Warranty
Delphi Product and Service Solutions (“Delphi”) warrants
all Delphi XM SKYFi Marine Kit Products sold by Delphi
(“Products”) to be free of defects in material and work-
manship, subject to the following conditions.
The duration of Delphi’s warranty with respect to Delphi
XM SKYFi Marine Kit Products is limited to one (1) year
from the date of sale to the original consumer purchaser.
No other express warranties are made with respect to
any Product. All implied warranties, including war-
ranties of merchantability and fitness for a particular
purpose are limited to the warranty period set forth
above. This warranty is not transferable and applies
only to the original consumer purchaser of the Product.
Delphi will, as its sole obligation under this warranty,
replace or repair, at its option, any Product that does
not conform to this warranty. Products may be repaired
or replaced with new or with refurbished items. This
limited warranty does not cover defects in appearance,
14
Caution:
The Delphi Marine Kit is splash-resistant,
NOT waterproof. The Delphi XM SKYFi Marine Kit is
not intended for use on personal watercraft (i.e., Jetskis
and similar). Doing so will void your warranty.
