41
To select the correct firing configuration:
Press (Increase) button to scroll to the correct configuration,
CLA
Metal Clay
Press (Program) button to select this configuration.
Once completed the LED display will return to the
IdLE
mode.
Select firing program
To select the correct firing program,
Press (Program) button to display the current firing program
Press (Increase) button to scroll to the correct program for your project
P-FS
Fast Fire PMC+
P-SL
Slow Fire PMC+
P3SL
Slow Fire PMC3
Std
Firing PMC Standard
GOLd
Firing PMC Gold
Press (Decrease) button to select the firing program and once selected the LED light
beside “Review” will light up. Additionally, the firing program selected will
begin to
display on the LED display beginning with
rA 1
. Once the review has been completed,
the display will show
Strt
.
Press (Program) button and the display will show
–On-
and begin firing. Note: If you
accidentally selected the wrong program or would like to stop the program, press
(Program) button again and the display will show
Stop.
Once the kiln has completed firing, the display will show
CPLt
and this message will
alternate with the temperature display and the total firing time from start to finish. DO
NOT open the kiln until it has completely cooled and the temperature shows room
temperature.