Delos DS10-1V, Operation Manual

Page: 7 / 12

2
.
Parameters setting
2.4 PA-03 UART mode type:
Parameters: UArt-0 (BIN format) or UArt-1 (ASCII format)
Operations:
Windows displays PA-03 , Press [Enter] key to enter ;
Press [CLS] key to toggle UArt-0 or UArt-1 ,
Press the [Enter] to confirm your choice
and Windows displays PA-03,
Press the [MM/INCH] key to the last step;
Press the [R/D] key to the next step;
2.5 PA-04 Accuracy adjustment of imperial unit:
Parameters: INCH-4 ( 4 bits decimal points )
or INCH-5 ( 5 bits decimal points )
Operations:
Windows displays PA-04 , Press [Enter] key to enter ;
Press [CLS] key to toggle INCH-4 or INCH-5 ,
Press the [Enter] to confirm your choice
and Windows displays PA-04,
Press the [MM/INCH] key to the last step;
Press the [R/D] key to the next step;
2.6 PA-05 Enable soft Limit function:
Parameters: ON (for enable) or OFF(for disable)
Operations:
Windows displays PA-05 , Press [Enter] key to enter ;
Press [CLS] key to toggle ON or OFF ,
Press the [Enter] to confirm your choice
and Windows displays PA-05,
Press the [MM/INCH] key to the last step;
Press the [R/D] key to the next step;
2.7 PA-06 input lower Soft Limit value:
Parameters:
Operations:
Windows displays PA-06 , Press [Enter] key to enter ;
Press [SET] key then press numeric number
to input lower soft limit value;
Press the [Enter] to confirm your choice
and Windows displays PA-06,
Press the [MM/INCH] key to the last step;
Press the [R/D] key to the next step;
5