Delos DS10-1V, Operation Manual

Page: 6 / 12

2
.
Parameters setting
Note:
Press key [
.
] to enter initial system and self-check after
DRO powers on in 1 second; then Parameters settings
display in the arameters window; press [R/D] and
[ММ /INCH] to select the item you want to change of
the step; press [Enter] key to enter the modification
program. Press [.] key to Exit.
2.1 PA-00 Select the encoder type:
Linear or Rotary Encoder
Parameters: Linear or Rotary
Operations:
Windows displays PA-00 , Press [Enter] key to enter ;
Press [CLS] key to toggle Linear or Rotary ,
Press the [Enter] to confirm your choice
and Windows displays PA-00, Press the [R/D] key to the next step;
2.2 PA-01 Set the resolution for Encoder :
Parameters: 0.1; 0.2; 0.5; 1; 2; 2.5; 5.0; 10.0; for Linear Encoder
and input value for Rotary Encoder
Operations:
Windows displays PA-01 , Press [Enter] key to enter ;
For linear encoder : Press [CLS] key to select the resolution ,
For Rotary encoder: Press [SET] key then press numeric number
to input the parameter for rotary encoder;
when the input numeric number is positive,
the unit is degree; when the input numeric number
is negative, the unit is degree/minute/second;
Press the [Enter] to confirm your choice
and Windows displays PA-01,
Press the [MM/INCH] key to the last step;
Press the [R/D] key to the next step;
2.3 PA-02 Set the counting direction of the counter :
Parameters: dir-0 or dir-1
Operations:
Windows displays PA-02 , Press [Enter] key to enter ;
Press [CLS] key to toggle dir-0 or dir-1,
Press the [Enter] to confirm your choice
and Windows displays PA-02,
Press the [MM/INCH] key to the last step;
Press the [R/D] key to the next step;
4