22
hard drive (helpful when you want to view multiple data types in a single project) or viewed
by inserting the data DVD into the DVD drive each time you want to view the data.
XMap Datasets
If XMap is not installed before you install the data or if your version of XMap is not listed
during the install, you must use the Map Data tab in XMap to manually add the data to the
base data. For more information, see
Changing the Base Map
on page 21.
XMap USA Street Level Data
This dataset can be saved on a hard drive or run from a DVD drive.
1. Ensure XMap is installed.
2. Insert the data DVD into your computer’s DVD drive. Once the DVD is detected, you
will be asked if you want to save the data to your hard drive. If you do want to save the
data, click
Yes
and proceed with the following steps. If you do not want to save the
data, click
No
(you will need to insert the data DVD into your DVD drive each time you
want to view the data in the program).
3. Click
Next
. The Destination Folder screen appears.
4. Optional: If you want to save the data somewhere other than the default location, click
Change
. The Change Current Destination Folder screen opens; select a hard drive
location from the Look In drop-down list. You can also browse to the new location or
use the New Folder button to create a new folder for the data. Click
OK
.
OR
If you know the path where you want to install the data, enter it into the Folder
Name text box. Click
OK
.
5. Click
Next
.
6. On the Data Connection Options screen, select the check box next to each installed
DeLorme program that you want to use to view the dataset and then click
Next
.
Note:
If this screen does not appear or if your software is not listed, you must
manually add the data to XMap. See
Changing the Base Map
on page 21.
7. On the Ready to Install Program screen, click
Install
.
