15
en
mode selection
mode SeLeCtion
Plug the appliance into a mains socket.
The appliance will operate in the previously-set mode.
If the
symbol appears on the display this means that
the appliance is in stand-by. Press the
button to turn the
appliance on. If the
symbol appears, it is necessary to
empty or position the tank correctly.
dehumidifying mode
Press the
button. The display show
and the previously-
set level of relative humidity. Press the + or - button to select
the desired level of humidity (30% corresponds to a dry environ-
ment, 80% corresponds to a humid environment).
Press the
button repeatedly to select the desired dehu-
midifying level (MIN/MED/MAX/AUTO).
min med mAX Auto
With the “AUTO” dehumidifying level the appliance independently
establishes the most suitable power and level of humidity, based
on the ambient conditions.
When the room has reached the set level of humidity, it will stop.
It will automatically begin dehumidifying as soon as the ambient
humidity exceeds the desired level.
“Laundry” mode
Press the button. The display shows . The appliance
operates at its maximum dehumidifying capacity.
This mode is suitable for particularly humid rooms or to allow
laundry to dry quicker.
Fan mode
Press the
button to turn on fan mode. The display shows
. This mode purifies the room using the silver ion filter
that the appliance is fitted with.
Press the
button repeatedly to select the desired venti-
lation speed (MIN/MED/MAX).
min med mAX
hygrometer/thermometer Function
Press the
button. The screen temporarily displays: tem-
perature and level of humidity in the area surrounding the
appliance.
Nota Bene:
the detected and displayed measurements
must be considered indicative.
Keyboard Lock mode
This mode is used to lock the keyboard, with the aim of avoi-
ding unwanted tampering with the appliance. To enable or
disable this mode, with the appliance on (not in stand-by),
press and hold down the
and
-
keys for at least 3 seconds.
The appliance will emit an acoustic signal. When the mode is
enabled the symbol appears on the appliance.
Change temperature scale
To change the temperature scale from °C to °F and vice versa,
with the appliance on, press the button for at least 20
seconds. The appliance will emit an acoustic signal.
timer mode
how to programme delay on
1) With the appliance in stand-by
, press the
button. The
symbol will appear, together with the
number of hours of delay you wish the appliance to start
up.
2) With the
+
and
-
buttons set the number of hours requi-
red (0.5÷24h).
Press the
button to confirm.
The
symbol will stay on.
3) When the set time has passed, the appliance will start
up.
how to programme delay oFF
1) While the appliance is on, press the
button.
The
symbol will appear, together with the number
of hours of delay you wish the appliance to switch off.
2) With the
+
and
-
buttons set the number of hours requi-
red (0.5÷24h).
Press the
button to confirm.
The
symbol will stay on.
3) When the set time has passed, the appliance will shut
down.
Changing or disabling the timer mode
If you wish to change the timer settings press the
key
once, and use the
+
and
-
buttons. Press the
button to
confirm. If you wish to disable the timer mode press the timer
key twice. The
symbol will switch off.
Nota Bene:
at start up or when the power comes back
on, the appliance will start up in the last mode that was ena-
bled before the appliance was switched off.
In case of a power outage, any timer programming will be
deleted.
