25
If the gas tap becomes stiff, it is necessary to dismount it accurately clean it with
gasoline and spread a bit of special grease resistant to high temperatures on it.
The operations must be executed by a qualified technician, operating as follows:
– Turn off the valve of the gas supply or of the cylinder.
– Remove the control panel as indicated in previous paragraphs.
– Unscrew the two screws that block the coupling flange.
– Remove the coupling flange and the spring of the knob holder rod.
– Lift the gas regulation cone.
– Accurately clean it with gasoline.
– Accurately spread it with a bit of grease suitable for high temperatures being careful
not to obstruct the holes for the gas passage.
– Re-mount all of the pieces, verifying that the spring and the rotation pin of the cone
mounted on the knob holder rod are perfectly in place.
Lubrication of the gas taps
