background image

2

ELECTRICAL REQUIREMENTS (UK ONLY)

Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt 
about your supply contact your local electricity company.
The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. 
Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined 
below.
Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and 
plug it into a supply socket - with the obvious consequent danger.
N.B. We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use.
IMPORTANT: the wires in the mains lead fitted to this appliance are coloured in accordance with the following code:

 

GREEN AND YELLOW    

EARTH

 

BLUE  

NEUTRAL

 

BROWN LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, 
proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth 
symbol 

or coloured green or green and yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the 
plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician.
Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced 
with a flexible cord of the same size.
After replacement of a fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost, the plug must not be used until a replacement cover is 
obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse recess or elsewhere on the plug. Always 
state this colour when ordering a replacement fuse cover.
Only  13amp replacement fuses which are asta approved to B.S. 1362 should be fitted.
This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference.

Warning - this appliance must be earthed

Green and Yellow to Earth

13 amp 

Fuse

Brown to 

live

Cord Clamp

Blue to 

neutral

IT

 

EN

  

FR

  

DE

 

NL

  

ES

 

pag. 6 

page 13 

pag.19 

S. 26 

pag. 33 

pág. 40

PT

 

EL

  

NO

  

SV

  

DA

  

FI

pág. 47 

σελ 54 

sid.61 

sid. 68 

sid. 75 

siv. 82

RU

 

KZ

  

HU

 

CS

  

SK

 

PL

 

HR

 

SL

 

стр. 89 

97-бет

 

old. 108 

str. 115 

str.122 

str.129 

str.136 

str.143

 

BG

  

RO

  

TR

  

AR

стр.150 

pag.158 

say.165 

           2

Reviews: