14
Fit selector (9) to the motor unit, pushing it
in until in place (fig.7).
The selector knob lets you select either
extraction cleaning or rinsing. The symbol
on the selector indicates plain water only
(rinsing) whilst the symbol
indicates
the s water solution (extraction
cleaning) (fig.8).
Connect the flexible hose (1) to the suction
inlet, rotating the coupling clockwise (bayonet
joint).
Connect solution injector (22) into the tank,
pressing it in until it clicks in place (fig.9).
Attach solution dispenser to the flexible hose
using the plastic clips (19) ( fig.9B).
Fit the two extension tubes (25), connecting
one end to the hose handgrip and the other
end to the transparent “wash-dry” attachment
(26) (fig.10). To make cleaning with the
extension tubes easier, fit them with the extra
handgrip (38) (fig.10).
Connect solution dispenser (previously fitted to
the “wash-dry” attachment) to the hose
handgrip, and attach the clips to the extension
tubes (fig.11).
Your extractor cleaner is now ready to clean
carpets and rugs.
ELECTRONIC MODEL
Models equipped with electronic suction
control have a selector to adjust suction power
to the type of fabric to be cleaned or the dirt to
be removed during extraction cleaning or other
operations (fig.12).
7
10
11
12
8
9
➠
➡
9B
11/19 Penta GB 11-01-2001 08:20 Pagina 14
