4
5
Please note:
This symbol indicates recommendations and important
information for the user.
- The heater must be positioned at least 50cm from
furniture or other objects.
- The first time you use the appliance, operate it of at
least 2 hours at maximum power level and maximum
temperature set to eliminate the “new” smell. A little
smoke due to the protective substances applied to the
heating element before transport may be given off, for
this reason we suggest you ventilate the room during
this operation.
- Do not obstruct the hot air outlet grilles or the air intake
grille on the bottom of the appliance.
- Position the appliance so that the plug and the outlet
can be easily reached even after installation.
- Do not use the appliance in rooms less than 4 m
2
in area.
- The appliance is fitted with a safety device which will
switch off it in case of accidental overheating.
To reset, please contact Customer Experience, see
enclosed guarantee.
DESCRIPTION
A
display
B
on-standby button
C
increase button
D
decrease button
E
power button
F
eco button
G
timer button
H
cord holder
I
wheel
USE
"Easy wheel" system
Turn the radiator upside down on a rug or a soft surface in
order to prevent damaging the paint finish.
Fully unfold the wheels by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
Location
The heater must not be placed immediately below a power
outlet. Do not use this radiator in rooms having a surface area
of less than 43 square feet (4 sq.m.).
Power connection
- Before using the appliance check that your supply
voltage is the same of that shown on the rating label
of the unit and that the power socket and power supply
line correspond to the load specified.
- Check also the current capacity of your fuses.
- This appliance complies with directive 2004/108/ec on
electromagnetic compatibility.
Plug in the heater, the appliance will be set in the stand-
by condition. The display will show the
symbol. Keep
loose clothing or bedding, furniture and flammable material
away from the power outlet where the heater is plugged in.
After an interruption of the power supply (power failure or
appliance unplugged) the unit goes always to stand-by.
Heating function
To turn the appliance on, press the (B) button.
Press button
(E) to set the required power level:
MIN ( ); MED (
); MAX (
). To select the
desired temperature, press or - (C or D). By pushing
the + or - button once, the temperature (shown on the
display) will increase or decrease by 1°C. Keeping the + or
- button depressed the value will increase o decrease rapidly.
The appliance allows to set the temperature from 5° to 28°C.
Anti-freeze function
Setting the temperature to 5°C with the "-" button, the
appliance will activate the Antifreeze function.
The display will show the symbol, in this way the
appliance will turn on automatically, at the max power,
only if the room temperature falls below 5°C. If you wish to
go back to the Heating function, press the "+" button once.
After an interruption of the power supply (probe failure or
appliance unplugged) the unit goes always to stand-by.
Eco function
When this function is active the appliance automatically sets
Fig. 1