17
PROBLEM
CAUSE
SOLUTION
PF
display
Temperature sensor is not working
properly
The product needs to be serviced, contact our toll
free number for assistance
Product doesn’t turn on
Check that the plug is connected
to the outlet
Auto-start is on
Room temperature reaches the set
temperature
Plug in
Wait till time elapsed or press the button (E) twi-
ce to cancel the auto-start and push the button
(A)
Use the “+” button to increase the set tempera-
ture
A green dot is flashing and unit
is off
The tip-over switch has been ac-
tivated
Make sure the appliance is standing upright on
a flat surface, if the problem persists contact our
toll free number to assist you
The display shows "
H
t
" blinking
The internal temperature is too
high. The air intake or outlet grille
is obstructed
Check the appliance is correctly positioned
respecting the minum distances from the wall, or
objects, as indicated on the instruction manual, if
not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet and let the
appliance cool down. After few minutes plug the
appliance again. If the appliance doesn't work
please contact the De longhi toll free number
TROUBLESHOOTING
