14
10.4 Customising the beverages
To deliver a customised milk-based beverage, proceed as
follows:
1. Press
(B3)at the bottom of the image correspond-
ing to the desired beverage. The parameters that can be
customised according to your tastes appear on the display
(B5):
Quantity
Aroma
Coffee type
2. After setting the parameters, press"Start";
3. The appliance proceeds with preparation and the image of
the selected beverage appears on the display, together with
a progress bar which gradually fills as the operation proceeds
and a description of each individual phase (grinding, milk
delivery, brewing coffee, etc.).
4. When delivery has ended, press "Save" to save the set-
tings, or "Cancel" to retain the previous parameters.
Please note:
If you save the new settings, they are memorised ONLY in the
selected profile.
5. Press "OK" to go back to the homepage (B).
The appliance is ready to be used again.
10.5 Cleaning the milk container after use
Each time you make a milk-based beverage, a request to clean
the milk frother appears on the display (B5). To start cleaning,
proceed as follows:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(D7) (fig. 27);
27
28
Clean
29
3. Turn the froth adjust-
ment dial (D3) to "Clean"
(fig. 28). Hot water and
steam are delivered
from the milk spout
(fig. 29). Cleaning stops
automatically;
4. Turn the dial back to one
of the froth selections;
5. Remove the milk con-
tainer and place in the
refrigerator.
Please note:
• To prepare a number of cappuccinos and milk based cof-
fees, clean the milk container after you have prepared
the last beverage only. To proceed with making the next
beverages, when the "Clean" message is displayed, press
"Cancel".
• If you do not clean the milk container, the symbol
(B8) appears on the display to remind you that cleaning
is required.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
• To ensure correct cleaning, wait for the CLEAN function to
end. You can, however, interrupt cleaning of the milk con-
tainer by pressing "Stop".
11. MUG TO GO (ECAM61X.7Y only)
The Mug to Go function is perfect for all those wanting to create
a customised beverage to take with them. Choose the ingredi-
ents (coffee only, coffee with milk or coffee with hot water) and
the delivery order, then customise the quantity.
To make the beverage, proceed as follows:
1. Remove the lid from the
travel mug (C9);
2. Raise the coffee spouts
(A14) and place the travel
mug container under-
neath (fig. 30);
3. On the homepage (B),
press the image corre-
sponding to the Mug to Go
function;
If the beverage has already
been saved, the appliance pro-
ceeds with preparation.
If you are making the beverage for the first time, proceed as
follows:
30
