DeLonghi PrimaDonna Elite Experience ECAM65X.85, Instructions For Use Manual

Page: 13 / 37

12
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section “8.5 Adjust time
”).
To enable auto-start, proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press (B10) or (B8) until " AUTO-START" ap-
pears on the display (B);
3. Select the function by pressing " ". The time setting
panel appears on the screen;
4. Press or corresponding to the hours and minutes
until the required auto-start time is displayed;
5. Press or to enable or disable
auto-start.
6. To confirm, press " " (or cancel and go back to
the settings menu by pressing " "), then press "
" to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned off using the main switch (A21),
the auto-start setting (if enabled) is lost.
8.7 Auto-off (standby)
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press (B10) or (B8) until " AUTO-OFF" appears
on the display (B), together with the current selection (15
or 30 minutes, or 1, 2 or 3 hours);
3. Press " " on the display to select the required value;
4. Press " " to go back to the homepage.
Auto-off is now programmed.
8.8 Cup warmer
To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press "
" (B2) to enter the menu;
2. Press (B10) or (B8) until " CUP WARMER" ap-
pears on the display (B);
3. Press " " to enable- or disable- the
cup warmer.
4. Press " " to go back to the homepage.
8.9 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press (B10) or (B8) until " ENERGY SAVING"
appears on the display (B);
3. Press " " to enable- or disable-
energy saving.
4. Press " " to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
8.10 Coffee temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press (B10) or (B8) until " COFFEE TEMPERA-
TURE" appears on the display (B) together with the current
selection (LOW, MEDIUM, HIGH or MAXIMUM);
3. Press " " to select the required temperature;
4. Press "
" to go back to the homepage.
Please note!
A different temperature can be set for each profile (see section
“17. Memorising your personal profile”).
8.11 Water hardness
For instructions on setting water hardness, see section “20. Set-
ting water hardness”.
8.12 Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press "
"
(B2) to enter the menu;
2. Press (B10) or (B8) until " SET LANGUAGE"
appears on the display;
3. Press " " : press or to display and select the
flag corresponding to the required language;
4. Press " " twice to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press (B10) or (B8) until " BEEP" appears on
the display (B);