14
TURNING THE APPLIANCE ON/OFF
Before plugging the appliance check
the cap on back of the unit is correct-
ly inserted on drainage hose (A10).
Insert the plug in the socket.
Two dashes appear on the display
indicating that the appliance is in
stand-by.
Touch the
C1
C2
C4
C11
C13
C19
C20
C9
C7
C5
C6
C3
C16
C14
C12
C10
C15
C17
C8
C18
(C1) key to turn on the
appliance.
When the appliance comes on, the
last function set before it was shut
off is activated.
Please note:
After few seconds
of the control panel inactivity, its
brightness will be automatically re-
duced and in the next few minutes
it will be further reduced.
To turn the appliance off, touch the
C1
C2
C4
C11
C13
C19
C20
C9
C7
C5
C6
C3
C16
C14
C12
C10
C15
C17
C8
C18
(C1) key again.
Please note:
Never turn off the air conditioner by simply pull-
ing the plug. Touch the
C1
C2
C4
C11
C13
C19
C20
C9
C7
C5
C6
C3
C16
C14
C12
C10
C15
C17
C8
C18
(C1) key in order to put your air
conditioner in stand-by and wait a few minutes before pulling
the plug. In this way, the appliance can perform the operating
status checks.
MODES SELECTION
To select the desired operating
mode, touch repeatedly the MODE
key (C2) until the desired function
is selected.
Wi-Fi FUNCTION (From the control panel)
To select or deselect the Wi-fi func-
tion, keep touching the MODE key
for 3 seconds.
Once the Wi-Fi icon is displayed it means that the following
Wi-Fi features are available:
SYMBOL WI-FI FIXED
it means that the Wi-Fi features are active AND the
“Home WLAN” has been found.
SLOW FLASHING
it means that the appliance is searching for the
“Home WLAN” .*
FAST FLASHING
it means that the “Home WLAN” has not been
found or has not been set yet.
“APP CONTROL “ ICON
When the APP CONTROL icon appears it means that
the last command has been received via app.
If the memorized “Home WLAN” settings needs to be changed,
proceed as follows:
a) keep touching for about 20 seconds the MODE button C2 on
the control panel until a prolonged beep is emitted;
b) the icon
and
blink simoultaneously.
c) use the app to enter the new WLAN settings into the unit.
* Note:
In standby, the search for “Home WLAN” stops after ap-
proximately 1 hour. It will resume once the appliance is turned
on again.
AIR CONDITIONING MODE
This is ideal for hot and humid weath-
er when the room needs to be both
cooled and dehumidified.
To correctly set this mode:
• Touch repeatedly the MODE key
(C2) until the air conditioning
symbol appears. The display will
show the desired temperature and
the AUTO fan speed.
. • To change the temperature to be
reached, touch the (C4) or (C3)
key.
Please note:
The most suitable temperatures, during the sum-
mer range from 24 to 27°C. However, setting the temperature
significantly lower than the outdoor temperature is not recom-
mended.
In conditioning mode, the air flow can be selected only from the
remote control.
