background image

14

Before cleaning or maintenance, turn the
appliance off by pressing the ON/STAND-BY
button then always unplug the appliance
from the outlet. 

CLEANING THE SURFACE OF THE UNIT

You should clean the appliance with a slight-
ly damp cloth then dry with a dry cloth.  
For safety reasons, never wash the air condi-
tioner with water. tioner with water. 

Precautions

Never use petrol, alcohol or solvents to clean
the appliance. Never spray insecticide liquids
or similar products.

CLEANING THE AIR FILTERS

To keep your air conditioner working efficient-
ly, you should clean the dust filter every week
of operation.
The filter is housed in the intake grille. 
To clean the filters, proceed as follows:   
1. Remove the dust  filter by extracting it

upwards (figure  

G

).

2. Use a vacuum cleaner to remove dust

accumulations from the filter. If it is very
dirty, immerse in warm water and rinse a
number of times. The water should never
be hotter than 40°C. After washing, leave
the filter to dry, then put back in place.

START OF SEASON CHECKS

Make sure the power cable and plug are
undamaged and the outlet is in good condi-
tion. Follow the installation instructions pre-
cisely.

END OF SEASON OPERATIONS

To empty the internal circuit completely of
water, remove the cap (figure 

H

).

Run off all water left into a basin. When all
the water has been drained, put the cap
back in place.

Clean the filter and dry thoroughly before
putting back.

Cleaning

G

H

Summary of Contents for Pinguino PAC CT110















Reviews: