12
O p e r a t i o n
SELF-DIAGNOSIS
The appliance is equipped with a self-diagnosis system which identifies any operating problems.
IF THE DISPLAY SHOWS…
….WHAT SHOULD YOU DO?
H
H P
P
HIGH PRESSURE
Insert and re-insert the plug. If the problem persists, call the service
centre.
LOW TEMPERATURE
If the machine is operating as an air-conditioner or dehumidifier, this
will prevent the formation of ice. The appliance will start up auto-
matically once the defrosting process has ended.
F
F F
F
FAN FAILURE
P
P F
F
PROBE FAILURE
If either of these messages appears, call the service centre.
FULL TANK
Empty the tank at the rear of the appliance and reposition correc-
tly.
THIS UNIT EMPLOYS AN EXCLUSIVE CON-
DENSATION RECYCLING SYSTEM TO DISPO-
SE OF EXCESS MOISTURE. IN NORMAL
CONDITIONS, CONDENSATION IS DISPO-
SED OF AUTOMATICALLY. WHEN THE HUMI-
DITY IS PARTICULARLY HIGH, AN EXCESS OF
CONDENSATION MAY BUILT UP IN THE TANK
. WHEN THIS HAPPENS, IN THE DISPLAY
APPEARS , INDICATING THAT THE TANK
SHOULD BE EMPTIED.
WHENEVER CONDITIONS OF HIGH HUMI-
DITY MAKE THE PROBLEM RECURRENT, YOU
MAY DISCHARGE THE EXCESS WATER
DIRECTLY INTO A DRAIN, USING THE RUB-
BER TUBE SUPPLIED; THE TUBE SHOULD BE
INSERTED INTO THE HOLE PROVIDED, AFTER
HAVING REMOVED THE RUBBER STOPPER.
9
MAKE SURE THE TANK IS PUT BACK COR-
RECTLY OTHERWISE IN THE DISPLAY WILL
REMAIN .
GB 19-06-2003 9:09 Pagina 12
