8
S e t t i n g u p
AIR CONDITIONING WITH SEMI-PERMA-
NENT INSTALLATION
If desired, Pinguino can also be installed on a
semi-permanent basis.
•
Fit the flange (13) supplied to the hole.
•
Fix the hose (14) in the housing at the rear
of the appliance (fig 1)
•
Fit the end of the hose to the flange (15)
as shown in fig. 5.
In this case it will be necessary to:
•
Drill a hole in a perimeter wall or in a win-
dow pane. Observe the height limits (fig.
6) and the dimensions of the hole given in
fig.5.
106 mm
41,8 inc
hes
MAX115 cm
MAX45,3 inches
MIN 50 cm
MIN 19.7 inches
When the hose (14) is not connected, the
hole can be closed off with the flange stop-
per (12).
N.B.
When operating the appliance with semi-per-
manent installation, it is advisable to leave a
door slightly ajar even only 1cm (0,4”), to
ensure free circulation of air.
In the window-
pane
In the wall: we
advise you to
insulate the sec-
tion of the wall
with appropria-
te insulation
material.
In the base
of the
window
frame
5
30 cm
11,8 inches
11,8 inches
30 cm
6
DEHUMIDIFICATION
Position the appliance in the room without
inserting the air exhaust hose (14); this ensures
that the dehumidified air will be released
directly into the atmosphere.
The air emitted through the front grill will be
cold while the air from the rear will be warm
(fig. 7) thus ensuring that the room is dehumi-
dified without variation in temperature.
7
GB 19-06-2003 9:09 Pagina 8
