16
The timer allows the delayed start up or shut down of the appli-
ance. This function will prevent wasting electricity by optimising
the operating periods.
How to program delayed shut down
• While the appliance is on in any operating mode, delayed
shut down can be programmed.
•
Press the
C1
C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
timer button (D8), the timer symbol (C15) and
hours (C14) light up.
• Press the (D3) and (D4)
buttons until the desired
numbers of hours to shut down appears on the display.
A few seconds after the timer is set, the setting is acquired, the
display shows the operating mode and the timer symbol stays lit.
Once the set time is elapsed, the air conditioner goes into stand-
by.
To cancel the timer program, press the
C1
C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
timer button (D8)
twice. The timer symbol (C15) will go off.
Please note:
Once the timer has been activated, by pressing the
timer button only one time, the remaining hours to shut down
will be displayed.
How to program delayed start up
• Plug in the appliance and set to standby.
•
Press the
C1
C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
timer button (D8), the timer symbol (C15) and
hours (C14) light up.
• Press the (D3) and (D4)
buttons until the desired
numbers of hours to start up appears. Start up can be pro-
grammed at any time within the 24 hours that follow.
When the set time is elapsed, the appliance will start to operate
in the same operating mode that was previously set.
To cancel the timer program, touch the timer button (D8) twice.
The timer symbol (C15) will go off.
Please note:
Once the timer has been activated, by pressing the
timer key only one time, the remaining hours to the start up will
be displayed.
ECO REAL FEEL FUNCTION
ECO REAL FEEL is the innovative De’Longhi technology that
works simultaneously on temperature reduction and humidity
control, securing best comfort level.
With traditional systems, during working time, optimal comfort
conditions may be reached but not secured over time. With ECO
REAL FEEL, once optimal comfort is reached, PAC automatically
modulates compressor action and air flow, to keep it over time.
To activate the function, press the ECO REAL FEEL button (D9).
The ECO REAL FEEL symbol (C9) appears.
Perfect!
Perfect!
Perfect!
HU
MIDIT
Y
TEMPERATURE
HIGH
MEDIUM
LOW
HIGH
MEDIU
M
LO
W
Operating curve
The “ECO REAL FEEL” status indicator (C9) becomes white for ap-
prox. 1 min. to indicate that the appliance is checking the room
conditions.
After a while the “ECO REAL FEEL” status indicator (C9) changes
colour as it approaches comfort conditions (see graph below).
Perfect!
Perfect!
ORANGE LIGHT
: Room conditions far
from optimal level.
GREEN LIGHT
: Most people feel good
room conditions, near optimal level.
BLUE LIGHT:
Best comfort level.
• The well-being feeling is a subjective condition. For this
reason, different people may judge differently the same
environmental conditions.
• In particularly severe environmental conditions (large size
of the environment, high temperature or humidity outside,
poor insulation of the room, too many of people or strong
heat load in the room, strong exposure to the sun ...) this
device may not be able to reach the best comfort level.
