14
MODES SELECTION
To select the desired operating
mode, touch repeatedly the MODE
key (C2) until the desired function
is selected.
AIR CONDITIONING MODE
This is ideal for hot and humid
weather when the room needs to
be both cooled and dehumidified.
To correctly set this mode:
• Touch repeatedly the
MODE
key (C2) until the air condition-
ing symbol appears. The
display will show the desired
temperature.
• To change the temperature
to be reached, touch the
(C3) or
(C4) key.
• Select the desired fan speed by touching the
(C5) key.
The speeds available are:
Minimum speed
: when maximum silent opera
tion is desired.
Medium speed
: when the noise level needs to
be low but with a good comfort level.
Maximum speed
: to reach the desired
temperature as soon as possible.
The appliance automatically chooses the best
fan speed based on the temperature selected
and the environmental conditions.
The most suitable temperatures during the summer range from 24
to 27°C. However, setting the temperature significantly lower than
the outdoor temperature is not recommended.
DEHUMIDIFYING MODE
This is ideal for reducing humidity in
the room (spring and autumn, damp
rooms, rainy periods, etc). For this
type of use, the appliance must be set
up as for air conditioning mode. That
is, the air exhaust hose (B2) must be
fitted to the appliance to allow the
humidity to be discharged outside.
To correctly set this mode:
• Touch repeatedly the
MODE
key (C2) until the dehumidify-
ing symbol appears.
• The appliance will automatically choose the best air flow.
FAN MODE
When using this mode, the air ex-
haust hose (B2) does not need to be
attached to the appliance.
To correctly set this mode:
• Touch repeatedly the MODE
(C2) key until the fan
sym-
bol appears.
• Select the desired air flow by touching the increase
(C3) or decrease
(C4) key.
The air flows available are:
Minimum air flow:
when most silent operation is
desired.
Medium air flow
: when the noise level needs to
be low but with a good comfort level.
Maximum air flow
: for maximum performance.
SELECT THE TEMPERATURE SCALE
The temperature can be displayed
in °C or °F. To change the tem-
perature unit of measure touch
simultaneously for ten seconds the
increase
(C3) and decrease
(C4) key.
OPERATING FROM THE REMOTE CONTROL
INSERTING OR REPLACING THE BATTERIES
• Remove the cover on the rear of the remote control;
• Insert or replace the batteries with two new LR03 “AAA”
1.5V batteries, inserting them correctly (see the directions
inside the battery compartment) (fig. 10);
• Replace the cover.
Please note:
If the remote control unit is replaced or discarded,
the batteries must be removed and disposed of in accordance
with current legislation as they are harmful to the environment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries. Do not dispose of batteries in fire.
Batteries may explode or leak. If the remote control is not be
used for a certain length of time, remove the batteries.
