9
LIGHTING GAS BURNERS
FITTED WITH SAFETY VALVE
DEVICE
To ignite the burner, the following
instructions are to be followed:
1) Press in the corresponding knob and
turn counter-clockwise (Fig. 2.2) to
the full flame position marked by the
) symbol (Fig. 2.1) and hold the
knob in until the flame has been lit.
In the case of a mains failure light the
burner with a match or lighted taper.
2) Wait for about ten seconds after the
gas burner has been lit before let-
ting go of the knob (valve activation
delay);
3) Adjust the gas valve to the desired
position.
If the burner flame should go out for
some reason, the safety valve will
automatically stop the gas flow.
To re-light the burner, return the knob to
the closed
●
position,
wait for at least
1 minute
and then repeat the lighting
procedure
.
If your local gas supply makes it difficult
to light the burner with the knob set to
maximum, set the knob to minimum and
repeat the operation.
In the case of a mains failure light the
burner with a match or lighted taper.
Caution!
The cooking hob becomes very hot
during operation.
Keep children well out of reach.
Fig. 2.2
Summary of Contents for PEM 965 GHI Series
Page 83: ...83 ...
Page 84: ...84 Code Код 1103242 ß3 ...
