background image

28

VENTILATION FUNCTION

If it is a truly sweltering day, you can activate the
ventilation function by pressing the        button.
A beep will indicate that the air-conditioner has
turned on, and the        symbol will begin to blink.
Now press the MODE button until the ventilation
symbol         appears on the display.

Once the ventilation has been activated, press
the        button repeatedly until you get the desired
fan speed.
It should be pointed out that when the automatic
ventilation functions are activated, the appliance
itself will choose the proper speed.

FULL AUTO FUNCTION

FULL AUTO  automatically activates the air-con-
ditioner, including the temperature, fan speed thus
assuring the best possible conditions for the room.

First push the       button to turn the appliance on.
A beep will indicate that the air-conditioner is
working and the        symbol will begin to blink.
Now use the MODE button until the  FULL AUTO
symbol appears on the display.

You should be advised that the air-conditioner will
need several seconds to start working.

AUTOMATIC SLEEP FUNCTION

If you want to sleep peacefully in a room perfectly
air-conditioned, press the       button to start the
appliance. A beep will indicate that the air-condi-
tioner has turned on, and the       symbol will begin
to blink.
Now use the MODE button until you get the sym-
bol for the function you want.

Next select the desired temperature by pushing
the             buttons.

Now press the       to set up the night-time func-
tion: the       symbol will appear. By pushing the     
button repeatedly until you get the number of
hours you want (from 1 to 7), you will set the time
for the appliance to switch off.
Under this function, the fan runs at low speed
(silent).

N.B:The night-time function makes it possible to keep a room at

a perfect temperature, thus preventing an excessive rise or
a drop in temperature while the silent operation is in effect.
The air-flow will decrease, while the room temperature will
vary gradually to provide the ideal condition: during the air-
conditioning stage, the temperature will increase by 1° C.
after 30 minutes and by 2° C. after one hour.

PAC180 GB  16-05-2003  11:56  Pagina 28

Summary of Contents for PAC 180


















Reviews: