PROGRAMMING THE TIMER
Programming the ON function
With the air-conditioner already running, press the
ON button: the ON TIME symbol will start blinking
and the clock will read 12:00.
Remember that the timer turns the air-conditioner
on, thereby resetting all the functions and proce-
dures operating before the appliance was last
turned off.
If the programming is the one you want, simply
press the SET button.
To put the clock ahead, use the button; to
put the clock back, use the button.
The increase or decrease will be in ten-minute
(10-minute) segments for each press of the but-
ton, whereas if you hold the button down the time
will change more quickly.
The ON TIME marking will continue to blink.
By pressing down on the SET button again, you
will get confirmation of the time set for the appli-
ance to turn on.
To cancel the programming, push the ON button:
the ON TIME marking will blink while showing the
turn-on time.
At this point, use the CANCEL button: the clock
will show the correct time at that moment.
PROGRAMMING THE TURN-OFF FUNC-
TION
The procedure for programming the turn-off and
cancellation operations is similar to the one just
described: the only difference is that you must
push the OFF instead of the ON button.
29
PAC180 GB 16-05-2003 11:56 Pagina 29
