17
16.2 Setting water hardness
1. Make sure the appliance is off (but connected to the
mains electricity supply and with the main switch in the
I position);
2. Press and hold the
button (B5) for at least 5 sec-
onds. The
and
lights come on together;
3. Press the
button (B3, on the left of the dial) to set the
actual water hardness as measured by the indicator paper.
Level Level Level Level
1
2
3
4
4. Press the
button (B8, on the right of the dial) to
confirm the selection.
The machine is now reprogrammed with the new water hard-
ness setting.
17. TECHNICAL DATA
Voltage:
220-240 V~ 50/60 Hz max. 10A
Absorbed power:
1450 W
Pressure:
1.5 MPa (15 bars)
Max. water tank capacity:
1.8 L
Size LxDxH:
240x430x350 mm
Cord length:
1150 mm
Weight:
8.9 kg
Max. beans container capacity:
250 g
The appliance complies with the following EC
directives:
• European Standby Regulation 1275/2008
• Materials and accessories coming into contact with food
conform to EEC regulation 1935/2004.
18. DISPOSING OF THE APPLIANCE
The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
Level 1
Level 2
Level 3
Level 4
19. EXPLANATION OF LIGHTS
LIGHT DISPLAYED
POSSIBLE CAUSE
REMEDY
The hot water/steam dial must be
turned (A19)
Turn the hot water/steam dial.
FLASHING
Insufficient water in the tank (A9). Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
The tank (A9) is not correctly in
place.
Insert the tank correctly and press as far as it
will go.
