8
Gas connection
- Important note
This appliance is supplied for use on NATURAL GAS only and cannot be used on any
other gas without modification.
The gas hob must be installed by a qualified person in accordance with the Gas Safety
Regulations 1984 and the relevant Building / I.E.E. Regulations.
Failure to install the appliance correctly could lead to prosecution under the Gas Safety
Regulations 1984.
In the U.K. C.O.R.G.I. registered installers undertake to carry out work to a safe and
satisfactory standard.
Electrical connection
For your safety please read the following information:
This appliance is supplied with a moulded 13 amp three pin mains plug with a 3 amp
fuse fitted. Should the fuse require replacement, it must be replaced with a fuse rated
at 3 amp and approved by ASTA or BSI to BS 1362.
The plug contains a removable fuse cover that must be refitted when the fuse is
replaced. In the event of the fuse cover being lost or damaged, the plug must not be
used until a replacement cover has been obtained. Replacement fuse covers can be
purchased from your nearest electrical dealer and must be the sarne colour as the
original.
IF THE MOULDED MAINS PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
HOME OR IS REMOVED FOR ANY OTHER REASON, THEN THE FUSE SHOULD BE
REMOVED AND THE CUT OFF PLUG DISPOSED OF SAFELY TO PREVENT THE HAZARD OF
ELECTRIC SHOCK.
THERE IS A DANGER OF ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET OUTLET.
If a replacement plug is to be fitted, please observe the wiring code shown below.
For the installer
Summary of Contents for GHS 260
Page 12: ...Ed 2 1101504 5 GHS 260 gas hob...
