10
- This appliance is not intended for use
at altitudes exceeding 2000 m (6561
feet).
- The appliance is fitted with a safety
device which will switch off it in case
of accidental overheating. To reset,
please contact Customer Experience,
see enclosed guarantee.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A
thermostat
B
switches
C
green pilot light
D
COMFORTEMP button
E
cord holder
F
wheel
USE
“Easy wheel” system
Turn the radiator upside-down on a rug or a soft surface
in order to prevent damaging the paint finish. Fully unfold
the castors by turning them outwards (see figure).
Turn the radiator back to its upright position.
Important!
Always operate the heater in upright
position only (wheels on the bottom, controls on top). Any
other position could create hazardous situation.
WATTS ECONOMIZER
For more economical use, the two switches may be
used individually, after unit has reached the operating
temperature.
With pilot lights ON, the heater is ON.
LOCATION
Place the heater on the floor beneath the coldest window
in the room, or any other location. Your heater will reduce
the effect of cold drafts. The heater should not be placed
immediately below a power outlet. Do not use this radiator in
rooms with a floor area of less than 43 square feet (4 sq. m.).
CONNECTION
The radiator should be connected to a properly polarized
household outlet in perfect working condition. Keep loose
clothing or bedding, furniture and flammable material away
from the heater’s wall outlet.
TURNING ON TWO-SWITCH MODELS
Turn the thermostat clockwise to its maximum position. Push
down both switches. The switch lights stay on independently
of the thermostat cycling. When room reaches the desired
temperature, turn the thermostat knob counter-clockwise
very slowly and carefully until you hear a click. This should set
your heater to maintain the desired temperature by cycling
on and off as required.
USE OF THERMOSTAT
The thermostat operates according to room air temperature,
rather than radiator temperature. Turning it counter-
clockwise to smaller numbers would decrease the
temperature; clockwise to greater numbers would increase
the temperature.
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.
