16.7 Resetting factory default settings (reset)
If you change the original values, the factory default values can be reset as follows:
• Press the button (the light over the button comes on) then press repeatedly until the applian-
ce displays:
RESET TO DEFAULT NO
• Press the button and the appliance displays "RESET TO DEFAULT YES”
• Press the button to reset the factory default values;
• The appliance is now reset to the factory default settings and the READY message is displayed.
17 CHANGING THE LANGUAGE
To change the language, press the button for at least 5 seconds until the appliance displays the
installation message in various languages. To select the required language, follow the instructions in section
4.1.
18 TROUBLESHOOTING
20
ADD PRE-GROUND
COFFEE
•
With the function selected, the pre-
ground coffee has not been poured into
the funnel.
•
Add the ground coffee as described in
section 9.
FILL BEANS CONTAINER
•
The coffee beans have run out.
•
If the coffee grinder is very noisy, this
means a small stone in the coffee beans
has blocked the mill.
•
Fill bean container.
•
Contact an authorized De' Longhi servi-
ce center.
DESCALE
•
This indicates the presence of lime scale
in the appliance.
•
The descaling procedure, described in
section 16.3, needs to be performed as
soon as possible.
MESSAGE
MEANING
WHAT TO DO
FILL TANK
•
The water tank is empty or is positioned
incorrectly.
•
The tank is dirty or encrusted with lime
scale.
•
Fill the water tank as described in sec-
tion 6, note 6 and insert it fully.
•
Rinse or descale the tank.
GROUND TOO FINE ADJUST MILL
AND
•
The appliance cannot make coffee.
•
Insert the hot water spout, press the
button and deliver water from the spout
for a few seconds.
INSERT WATER SPOUT AND
PRESS OK
•
The coffee runs off too slowly.
•
Turn the grinding regulator (fig. 12) one
click clockwise (see section 8).
EMPTY GROUNDS CONTAINER
•
The grounds container is full or missing. •
Empty the grounds container and clean
as described in section 6, note 7, then
replace.
INSERT GROUNDS CONTAINER
•
After cleaning, the grounds container
has not been replaced.
•
Open the service door and insert the
grounds container.
