background image

15

15.  Turn the knob to the 0 position, fill the water tank again 

and the appliance goes off automatically. 

To use the appliance, turn it on by pressing the  

button. 

SETTING WATER HARDNESS

The 

 message comes on after a period of time established 

according to water hardness.  
The machine is set by default for a hardness value of 4 (very hard 
water). 
The machine can also be programmed according to the hardness 
of the mains water in the various regions so that the machine 
needs to be descaled less often. 

Measuring water hardness

1.  Remove the “TOTAL HARDNESS TEST” indicator paper at-

tached to this manual from its pack. 

2.  Immerse the paper completely in a glass of water for one 

second. 

3.  Remove the paper from the water and shake lightly.  After 

about a minute, 1, 2, 3, or 4 red squares form, depending 
on the hardness of the water. Each square corresponds to 
one level. 

Set water hardness

1.  Make sure the appliance is off (but connected to the mains 

electricity supply and with the main switch in the I posi-
tion);

2.  Press and hold the 

 button for at least 6 seconds. The 

 lights come on;

3. Press 

ECO 

to set the water hardness (the level shown by the 

total hardness test).

  Livello Livello Livello Livello

1

2

3

4

4.  Press the 

button to exit the menu. 

The machine is now reprogrammed with the new water hard-
ness setting.

SETTING THE TEMPERATURE

To modify the temperature of the water used to make the coffee, 
proceed as follows:

1.  With the appliance off and the main switch in the I position 

(fig. 3), press the 

 button and hold it down until the 

lights on the control panel come on. 

2.  Press the   

  button to select the required temper-

ature:

  LOW  

HIGH

3.  Press the 

 button to confirm the selection. The lights 

go off.  

TECHNICAL SPECIFICATION

Voltage:   

220-240 V~ 50/60 Hz max. 10 A

Absorbed power:   

1450 W

Pressure:   

15 bar

Water tank capacity:   

1,7 L

Size: LxHxD:  

280x364x400 

 mm

Cable length:  

1,5 m

Weight:  

10,8

 kg

This product is compliant with Regulation (EC) No. 

1935/2004 on materials and articles intended to come 
into contact with food.

DISPOSAL

  

 

The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.

Level 1

Level 2

Level 3

Level 4

Summary of Contents for ESAM22 Series





















Reviews: