13
ERROR
MESSAGES ON
THE DISPLAY
DESCRIPTION
POSSIBLE
PROBLEM
SOLUTION
E0:11
Err
Temperature probe
malfunction
The electronic
controller has
detected a
temperature probe
malfunction
Write down the error number.
Reset the controller by pressing the on/stand-by butto n
(N) for 2 seconds and unplug. The temperature probe may be
damaged. Contact an authorized DeLonghi service centre and
give them the error number.
E0:12
Err
Temperature probe
malfunction
The electronic
control has
detected a
temperature probe
malfunction
Write down the error number.
Reset the controller by pressing the on/stand-by button
(N) for 2 seconds and unplug. The temperature probe may be
damaged. Contact and authorized DeLonghi service centre and
give them the error number.
E0:21
Err
Set temperature
has not been
reached
The oven was not
able to reach the
set temperature
in a reasonable
amount of time
The electronic
controller detected
an excessive
amount of time
to reach the set
temperature inside
the oven chamber.
Write down the error number.
Reset the controller by pressing the on/stand-by button (N)
for 2 seconds and unplug. First, make sure that the oven door
was closed properly during operation.
If the door is kept open during operation, the oven cannot
reach the set temperature.
If, however, the door was closed properly, the heating
elements may be damaged.
Contact an authorized DeLonghi service centre and give them
the error number.
E0:22
Err
Overheating
The oven
temperature is too
high.
The electronic
controller detected
an overly high
temperature inside
the oven chamber.
Write down the error number.
Reset the controller by pressing the on/stand-by button (N)
for 2 seconds and unplug. The electronic controller on the oven
may be damaged.
Contact an authorized DeLonghi service centre and give them
the error number.
E0:27
Err
Unexpected
heating
The temperature
probe detected
a temperature
increase even
though the heating
elements were off.
The electronic
controller detected
Unexpected
heating inside the
chamber while the
heating elements
were off.
Write down the error number.
Reset the controller by pressing the on/stand-by button (N)
for 2 seconds and unplug.
This error can occur if the DEFROST function was started while
the oven was still hot from a previous use. Make sure the oven
is completely cool before starting the DEFROST function. If the
DEFROST function was not used, the electronic controller could
be damaged. Contact an authorized DeLonghi service centre
and give them the error number.
OPERATIONAL ANOMALIES
