DeLonghi ECAM44.66X ELETTA, Instructions For Use Manual

Page: 12 / 23

11
Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable (or enable) energy saving, proceed as follows:
1. Press the
MENU/ESC button (B2) to enter the menu;
2. Press or (fig. 9) until “Energy saving” is displayed;
3. Press the
OK button (fig. 3): ”Disable?” is displayed (or “Ena-
ble?” if the function has been disabled);
4. Press the OK button to disable (or enable) energy saving
mode;
5. Then press the
MENU/ESC
button to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.
Please note!
• When in energy saving mode, a few seconds elapse before
the first coffee, cappuccino or milk based coffee is delivered
as the appliance must heat up again.
• To prepare any drink, press any button to exit energy sav-
ing, then press the button corresponding to the drink you
want to make.
• If the milk container is inserted, “Energy saving” is not
activated.
Setting the temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the
MENU/ESC (B2) button (B2) to enter the menu;
2. Press or (fig. 9) until “Set temperature” is displayed;
3. Press the
OK button (fig. 3);
4. Press or until the required temperature (
●
=low;
●●●●
=maximum);
5. Press the OK button to confirm;
6. Then press the
MENU/ESC
button to exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 18.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the
MENU/ESC button (B2) to enter the menu;
2. Press or (fig. 9) until “Set language” is displayed;
3. Press the
OK button (fig. 3);
4. Press or until the required language is displayed;
5. Press the
OK
button to confirm;
6. A message confirming the language installed is displayed;
7. Then press the
MENU/ESC
button to exit the menu.
Beep
This enables or disables the beep emitted by the appliance
whenever a button is pressed or an accessory is inserted/re-
moved. To disable or re-enable the beep, proceed as follows:
1. Press the
MENU/ESC
button
(
B2) to enter the menu;
2. Press or (fig. 9) until “Beep” is displayed;
3. Press the
OK
button (fig. 3): “Disable?” is displayed (or “En-
able?” if disabled);
4. Press the
OK
button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the
MENU/ESC
button
(
B2) to enter the menu;
2. Press or (fig. 9) until “Default values” is displayed;
3. Press the
OK
button (fig. 3);
4. “Confirm?” is displayed;
5. Press the
OK button to confirm e exit.
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the
MENU/ESC button ( B2) to enter the menu;
2. Press or (fig. 9) until “Statistics” is displayed;
3. Press the
OK button (fig. 3);
4. Press or to verify:
- how many coffees have been made;
- the total number of cappuccinos and milk based cof-
fees made;
- the total number of litres of water delivered.
- how many times the machine has been descaled.
- how many times the water softener filter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.
MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste