11
2. Press and hold the
icon (B9) until the lights on the
touch screen (B) come on;
3. Press the
icon (B10);
4. Press the
icon again to select the required
temperature:
low
medium
high
maximum
5. Press the
OK
icon (B15) to confirm (or
ESC
(B14) to exit without making the change).
The lights go off.
The appliance returns to "standby" and the temperature is now
programmed.
10. AUTO-OFF
The time can be changed so that the appliance switches off after
being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.
To change the Auto-off setting, proceed as follows:
1. With the appliance off (standby), but the main switch
pressed (fig. 1);
2. Press and hold the
icon (B9) until the icons on the
touch screen (B) come on;
3. Press the
icon (B11);
4. Select the required time interval by pressing the
icon
again:
15 min.
30 min.
1 hour
2 hours
3 hours
5. Press the
OK
icon (B15) to confirm (or
ESC
(B14) to exit without making the change). The lights go off.
The auto-off time is now programmed.
11. 11. ENERGY SAVING
Use this function to enable or disable energy saving. This mode
is active by default, reducing energy consumption while the ma-
chine is on in compliance with current European regulations. To
change the setting, proceed as follows:
1. With the appliance off (standby), but the main switch
pressed (fig. 1);
2. Press and hold the
icon (B9) until the icons on the
touch screen (B) come on.
3. Press the
icon (B13);
4. Press the
icon again to enable/disable the function:
•
function enabled
•
function disabled
5. Press the
OK
icon (B15) to confirm (or
ESC
(B14) to exit without making the change).
6. Press
ESC
to exit the menu. The lights go off.
The energy saving setting is now programmed.
Please note!
• When in energy saving mode, a few seconds may elapse
before the first coffee is delivered as the appliance must
heat up again.
12. 12. BEEP
This function enables or disables the beep. Proceed as follows:
1. With the appliance off (standby), but the main switch
pressed (fig. 1);
2. Press and hold the
icon (B9) until the lights on the
touch screen (B) come on.
3. Press the
icon to enable/disable the function:
•
function enabled
•
function disabled
4. Press the
OK
icon (B15) to confirm (or
ESC
(B14) to exit without making the change). The lights go off.
The beep is now programmed.
13. DEFAULT VALUES (RESET)
This function resets all settings (temperature, auto-off, water hard-
ness, energy saving and all quantity settings are reset to the default
values).
1. With the appliance off (standby), but the main switch
pressed (fig. 1);
2. Press and hold the
icon (B9) until the lights on the
touch screen (B) come on.
Summary of Contents for ECAM35X.15 Series
