9
Description of the control panel
(page 2 - C )
C1.
button: turns the machine on and off (standby)
C2.
button: to select the coffee taste
C3.
button: to perform a rinse
C4.
button: to select double size
C5.
button: to start descaling
C6.
button: to start delivery
C7. “Select drink” knob
Description of the milk jug
(
page 2 - D )
D1. Froth and CLEAN dial
D2. Frothed milk spout (adjustable)
D3. Milk intake tube
D4. Milk container
Description of the accessories
(
page 2 - E )
E1. Pre-ground coffee measure
E2. Cleaning brush
E3. Hot water spout
E4. Water softener filter (*certain models only)
E5. “Total Hardness Test” indicator paper
E6. Descaler
PRELIMINARY CHECKS
Checking the machine
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the machine if it is visibly damaged.
Contact De’Longhi Customer Experience.
Installing the machine
Important!
When installing the machine, respect the following safety
warnings:
• The machine gives off heat.
After positioning the machine on the worktop, leave a
space of at least 1.18 in / 3 cm between the surfaces of the
machine and the side and rear walls and at least 5.9 in/ 15
cm above the coffee maker.
• Water penetrating the coffee maker could cause damage.
Do not place the machine near taps or sinks.
• The machine could be damaged if the water it contains
freezes. Do not install the machine in a room where the
temperature could drop below freezing point.
• Arrange the power cable in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
Connecting the machine
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
machine.
If the power socket does not match the plug on the machine,
have the socket replaced with a suitable type by a qualified
professional.
Using the machine for the first time
Please note!
• Coffee has been used to factory test the machine and it is
therefore completely normal for there to be traces of coffee
in the mill.
The machine is, however, guaranteed to be new.
• You should customise water hardness as soon as possible
following the instructions in the section “Setting water
hardness” (page 10).
Follow the instructions:
1. Remove the water tank, fill to the MAX line with fresh
water (fig. 1A) then put back in the machine (fig. 1B).
2. Check that the hot water spout is inserted on the nozzle
and place a container (fig. 2) with a minimum capacity of
100 ml underneath.
3. Plug the machine into the mains socket and press the main
switch (fig. 3).
4. The
and the
lights turn on (fig. 4).
5. Press the
button: the machine delivers water from the
hot water spout then goes off.
6. The machine automatically switches off.
The coffee maker is now ready for normal use.
Please note!
• When using the machine for the first time, you need to
make 4-5 cups of coffee or 4-5 cappuccinos before the ma-
chine starts to give satisfactory results.
• To enjoy your coffee even more and improve the perfor-
mance of your machine, we recommend installing a water
softener filter as described in the section “ WATER SOFT-
ENER FILTER “ (page 15). If your model is not provided
with a filter, you can request one from De’Longhi Customer
Services.
TURNING THE MACHINE ON
Please note!
Before turning the machine on, make sure the main switch is
pressed (fig. 3).
