ECAM23120
TEST YOUR WATER
Measuring Water Hardness
1. Remove the “total hardness test” indicator paper attached to the instructional
manual from its pack.
2. Immerse the paper completely in a glass of water for one second.
3. Remove the paper from the water and shake lightly. After about a minute,
1,2,3, or 4 red squares form, depending on the hardness of the water.
Each square corresponds to one level.
With the appliance off, but connected to the mains and with the main
switch in the I position:
Hold down for SIX seconds.
Press the button
repeatedly until
the number of
lights that are on
coincides with
the number of
red squares on
the test strip.
Press the button to
confirm the selection.
1
2
3
4
10
Choosing the water hardness is very
important to set the correct frequency of
the descaling cycles.
Keeping the machine clean will improve
its performance and prolong the life of
the machine.
Summary of Contents for ECAM23120
Page 15: ...ECAM23120...
