ECAM23120
B
After about 30 minutes, the water tank is empty
and the
and
lights flash. Turn the hot
water/steam dial clockwise to the 0 position. The
appliance is now ready for rinsing through with
clean water.
7. Empty the container used to collect the
descaler solution and replace it empty under
the hot water/steam spout.
8. Remove the water tank, empty, rinse under
running water, fill with clean water and replace.
The light flashes.
9. Turn the hot water/steam dial counter-clock-
wise to the I position. Hot water is delivered
first from the hot water/steam spout, to con-
tinue and end with the coffee spout.
10. When the water tank is completely empty,
the
light flashes.
11. Turn the dial clockwise to the 0 position.
The
light flashes to require a new rinsing:
fill the tank and Turn the hot water/steam dial
to the I position (water flows from the
hot water/steam spout only).
12. When it finishes, the
light flashes on the
control panel. Turn the hot water/steam dial to
the
O position.
Fill the water tank again and the machine is
ready for use.
A
A
C
D
E
Important!
Descaler contains acids which may irritate the skin and eyes. It is vital to respect the manufacturer’s safety warnings
given on the descaler pack and the warnings relating to the procedure to follow in the event of contact with the skin and
eyes. You should use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may
result in faults not covered by the manufacturer’s guarantee.
Important! Danger of Burns
Hot water containing acid flows from the spout.
Avoid contact with splashes of water.
Descale the appliance when the
light on
the control panel flashes.
1. Turn the appliance on and wait until it is ready
for use.
2. Empty the water tank
(A)
and remove the softener
filter, if present. Empty the drip tray
(B)
and
grounds container, then put back in the
appliance.
3. Pour the descaler into the tank up to the l
level A
(C)
, then add water up to level B
(D)
. Replace the water tank.
4. Place an empty container
(
E)
with a minimum
capacity of 60 oz./1.8 liters under the
hot water/steam and coffee spouts.
5. Press the
button and hold it down for
at least 5 seconds to confirm that you have
added the solution and begin the descaling
procedure. The light in the button remains on
steadily to indicate that the descaling program
has begun. The
light flashes telling you to
turn the steam dial to the l position.
6. Turn the hot water/ steam dial a counter-clock
wise to the I position. The descaler solution
flows out of the hot water/steam spout and
coffee spouts into the underlying container.
The descale program automatically performs
a series of rinses and pauses to remove the
limescale. It is normal for several minutes of
inactivity to elapse between rinses.
12
DESCALING
B
Summary of Contents for ECAM23120
Page 15: ...ECAM23120...
