11
This sets the time. Press the
(B4) button to exit the
menu.
8.3 Auto-off
Auto-off can be changed so that the appliance goes off after 15
or 30 minutes, or after 1, 2 or 3 hours.
To reprogramme auto-off, proceed as follows:
1. Press the
P
button (B3) to enter the menu;
2. Turn the selection dial (B5 - fig. 8) until “Auto-off” is
displayed;
3. Press the
button (B9-fig. 2);
4. Turn the selection dial until the desired operation time is
displayed (15 or 30 minutes, or 1, 2 or 3 hours);
5. Press
the
button to confirm;
6. Press the
button (B4) to exit the menu.
Auto-off is programmed.
8.4 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function
, the time must be set correctly.
1. Press the
P
button (B3) to enter the menu;
2. Turn the selection dial (B5 - fig. 8) until “Auto-start” is
displayed;
3. Press the
button (B9 - fig. 2). “Enable?” is displayed;
4. Press
the
button to confirm;
5. Turn the selection dial to choose the hours;
6. Press the
button to confirm;
7. Turn the selection dial to change the minutes;
8. Press the
button to confirm;
9. Press the
button (B4) to exit the menu.
Once the time has been confirmed, activation of auto-start is
indicated by the
symbol displayed alongside the time and
under “Auto-start” in the menu.
To disable the function:
1. Select “Auto-start” from the menu;
2. Press
the
button. “Disable?” is displayed;
3. Press
the
button to confirm.
The
symbol is no longer displayed.
8.5 Set
temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press
the
P
button (B3) to enter the menu;
2. Turn the selection dial (B5 - fig. 8) until “Set temperature”
is displayed;
3. Press the
button (B9 - fig. 2).
4. Turn the selection dial until the required temperature
(high, medium, low) is displayed;
5. Press the
button to confirm;
6. Press the
button (B4) to exit the menu.
8.6 Energy
saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
1. Press
the
P
button (B3) to enter the menu;
2. Turn the selection dial (B5 - fig. 8) until “Energy saving” is
displayed;
3. Press
the
button (B9 - fig. 2). “Disable?” is displayed
(or “Enable?” if the function has already been disabled);
4. Press
the
button to enable or
button (B4) to
disable the function;
5. Press
the
button to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.
Please note :
When in energy saving mode, a few seconds may elapse before
the first coffee is delivered as the appliance must heat up again.
8.7 Setting water hardness
For instructions on setting water hardness, see section “14.1
Setting water hardness”.
8.8 Setting the language
To modify the language on the display (B1), proceed as follows:
1. Press the
P
button (B3) to enter the menu;
2. Turn the selection dial (B5 - fig. 8) until “Set language” is
displayed;
3. Press the
button (B9 - fig. 2);
4. Turn the selection dial until the required language is
displayed;
5. Press the
button to confirm;
6. Press the
button (B4) to exit the menu.
8.9 Install
filter
For instructions on how to install the filter (C4), see the section
“15.1 Installing the filter”.
8.10 Replacing the filter
For instructions on how to replace the filter (C4), see the section
“15.2 Replacing the filter”.
Summary of Contents for ECAM23.42X
