5
LIGHTS
EXPLANATION OF LIGHTS
OPERATION
Flashing
(
and
lights show the
corresponding current selection)
The machine is setting for ready to use
Wait
Insufficient water in tank (A7) or water
tank not inserted correctly
Fill the tank or extract the tank and put it back
correctly
Flashing
You are trying to deliver a beverage but
water tank (A7) is empty
Fill the tank
The grinding is too fine and the coffee is
delivered too slowly or not at all
Extract the portafilter (C1) and repeat the
operations to make the coffee, bearing in mind
the instruction given in the quick start guide
relative to the grinding section
The filter (C3) or (C4) is blocked
Clean as described in section “5. Cleaning and
maintenance”.
The tank (A7) has been inserted incorrectly
and the valves on the bottom are not open
Press the tank down lightly to open the valves
on the bottom
Scale in the water circuit
Descale as described in section “9. Descaling”
1-dose beverage is selected
All the process (from grinding to delivery) is
setted for preparing 1 cup
2-doses beverages are selected
All the process (from grinding to delivery) is
setted for preparing 2 cups
MIN
MED
MAX
Choose 1 of the 3 temperatures
available
See Quick Guide for tips.
Flashing
General alarm
Contact Customer Service
Flashing
Steam function is selected and running In a few seconds the appliance starts steam
delivery
ON - coloured red
Descaling must be performed
Descale the appliance as described in section
“9. Descaling”
Flashing ON - coloured orange
Descaling is selected
Press OK (B6) to run descaling cycle or turn the
selection knot to the beverage desired
Flashing - coloured orange
Descaling is performing: the machine is
delivering the descaling solution
Proceed completing the descaling cycle (see
“9. Descaling”)
