10
A
B
9. DESCALING
1. (IF PRESENT, REMOVE
THE WATER SOFTENER
DEVICE). Pour the des-
caler into the tank (A7)
up to the level
A
marked inside the tank
(equal to one 100ml
packet).
2. Add water (1 liter) up
to the level
B
.
Then put the water tank
back in the appliance.
3. Turn the mode selector
dial (B8) to : the OK
light (B6) turns to orange
and the descaling light
(B3) flashes.
4. Make sure the portafilter is
not attached and position a
recipient under the coffee
outlet (A10), hot water
spout (A11) and steam
wand (A9).
5. Keep pressed for at least
3 seconds the OK
button:
the OK light begins to
flash; descaling starts.
12.
Please note
•
Before use, read the instructions and the labelling on the descaler pack.
•
It is important to use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result
in faults not covered by the manufacturer’s guarantee.
•
Descaler could damage delicate surfaces. If the product is accidentally spilt, dry immediately.
4
1
5
2
3
RED
30
Minutes
De’Longhi Appliances s.r.l.
Via L. Seitz, 47 31100 Treviso - ITALY
Tel. +39 0422 4131
5413218631/04.15
Decalcificante per macchine da caffè
Descaler for coffee machines
Détartrant pour machines à café
Entkalker für Kaffeemaschinen
2 L
Please note
•
In case you start the descaling cycle by mistake, you can press the OK button
for 10 seconds; the rinsing cycle can not be stopped (from step 9).
6. The descale programme starts and the descaler liquid
comes out of the steam wand and coffee outlet. The des-
cale programme removes limescale deposits from inside
the appliance by automatically performing a series of
rinses and pauses until the tank is empty.
Delivery stops and the OK light turns to white. This indi-
cates that it is necessary to proceed with rinsing: see next
page.
When the light (B3) comes
on, it is time to proceed descal-
ing the machine. The descaling
cycle can be run in any moment.
