9 PREPARING ESPRESSO COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS)
• Press the button (fig. 16) to select the ground coffee function. This disables the coffee mill function.
The appliance displays:
READY PRE-GROUND
• Lift the lid in the centre, place one measure of ground coffee in the funnel (see fig. 17) and proceed as
described in section 6. NB: You can make just one coffee at a time by pressing the , or
button once only.
• After using the appliance with pre-ground coffee, to go back to making coffee using beans, deactivate
the ground coffee function by repressing the button to prepare the grinder for operation again.
NOTE 1:
Never add the ground coffee when the appliance is off to avoid it from being dispersed inside the
appliance.
NOTE 2:
Never add more than 1 measure, otherwise either the appliance will not
make the coffee and the ground coffee will be lost inside the appliance, dirtying it, or
the coffee will run off in drips.
NOTE 3:
When dosing the quantity of coffee to be added, use the measure supplied only.
NOTE 4:
Use ground coffee for espresso coffee makers only. Do not use coffee beans, freeze-dried coffee
or other materials that could damage the appliance.
NOTE 5:
If you add more than one measure of ground coffee and the funnel blocks, use a knife to push the
coffee down (fig. 18), then remove and clean the infuser and appliance as described in section 15.2
"Cleaning the infuser".
10 PRODUCING HOT WATER
• Always make sure the appliance is ready.
• Make sure the water spout is attached to the nozzle (fig. 4);
• Position a container under the spout (fig. 3).
• Press the button (fig. 1).
The appliance displays:
HOT WATER
and hot water is run off from the water spout into the container below (you should not run off hot water
for more than two minutes at a time). To stop the flow, press the button. Once the set quantity of hot
water has been reached, run-off stops automatically.
29
