GB
4. Place the bottom hole of the door onto the bottom
hinge pin. Insert the upper hinge pin into the upper
hole of the door. Screw the upper hinge tightly.
Screw also the other side tightly.
5. Put back the top cover. Tighten the 2 screws
at the back of the top cover.
6. Transfer the door handle to the other side of the
door accordingly. Remove the 2 door screw hole
covers from the other side of the door and swap
their position with the door handle.
Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all
sides before finally tightening the hinge.
In some cases, the door seal may be crushed after prolonged storing pressure, resulting
to the door seal not able to close properly when reversed.
Follow the steps below to solve the issue:
1. Peel off the door seal from the upper or lower corner and
warm it with a hairdryer; the warmth can allow the door seal
to return to its original form. Do not blow directly on the unit
as the warmth may damage other parts of the unit.
2. Rotate the door seal upside down so that the side originally
with the hinge stay with the hinge.
3. Insert the door seal back into the door from the upper or
lower corner.
4. If the issue still occurs, contact your local service centre for
assistance.
180°
16
installation
DUR55X19G_IB_2L_190628_grace.indb 16
28/6/2019 5:49 PM
