GB
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on
something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
reversing the door swing
tools required:
Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Remove the two screws from the back of the top
cover, then lift the top cover and place it on a padded
surface to prevent from scratching.
2. Remove the four screws (2 from each side).
Remove the upper hinge. Lift the door and place it
on a padded surface to prevent from scratching.
3. Remove both levelling feet, and bottom hinge. Swap
their position.
•
DO NOT
lay the unit flat as this may
damage the coolant system.
• During door reversal, when swapping the
position of the bottom hinge or adjusting
the levelling feet, tilt the unit.
Do not
lay the
unit flat.
①
②
Bottom
hinge pin
Before transferring the bottom hinge to the
other side, move the bottom hinge pin from
hole 1 to 2. Tighten the pin securely.
15
installation
DUR55X19G_IB_2L_190628_grace.indb 15
28/6/2019 5:49 PM
