33
Figure 25
INSIDE OF OVEN
■
The oven should always be cleaned after use when it has cooled down.
Let the oven
cool down and pay special attention no to touch the hot heating elements inside
the oven cavity.
■
The cavity should be cleaned using a mild detergent solution and warm water.
■
Suitable proprietary chemical cleaners may be used after first consulting with the
manufacturers recommendations and testing a small sample of the oven cavity.
■
Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity
surface.
■
NOTE:
The manufacturers of this appliance will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Do not store flammable material in the oven.
GRILL HEATING ELEMENT
■
The heating element is self-cleaning and does not require maintenance.
REPLACING THE OVEN LIGHTS
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
■
Let the oven cavity and the heating elements to cool down.
■
Switch off the electrical supply.
■
Remove the protective cover (fig. 25).
■
Replace the halogen lamp with a new one suitable for high temperatures having the
following specifications:
220-240 V or 230-240 V, 50 Hz and same power (check watt
power as stamped in the bulb itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the lamp with bare hands; contamination
from your fingers can cause premature failure. Always use a clean cloth or
gloves.
■
Refit the protective cover.
NOTE:
Oven bulb replacement is not covered by your guarantee.
WRONG
CORRECT
