17
4-Wire Power Cord Installation using
Strain Relief Supplied
(See Figures 3.1 and 3.3)
1. Remove the
Terminal Block Access Plate
on the back of the
range by unscrewing the 4 fixing
Screws
(fig. 3.1).
2. Insert the
Power Cord
through the
Bracket
; then tighten the
Power Cord
by using the
Strain Relief
. Allow enough slack
to easily attach the cord terminals to the
Terminal Block
.
3. Remove the 3 wire terminal nuts and washers from the
Terminal Block
.
4. Remove the
Ground Strap
from the frame of range and ter-
minal by removing its screw and cutting it as shown in
Figure 3.3.
5. Plug the terminal holes of
Power Cord.
The
Neutral Wire
of
the
Power Cord
must be connected to the neutral terminal
located in the center of
Terminal Block
; the
Power Wires
must be connected to the outside terminals; the
Ground Wire
must be attached to the frame of range by using the
(Ground) identified
Grounding Screw
.
6. Plug washers and tighten nuts securely.
7. Assemble the
Terminal Block Access Plate
.
3-Wire Power Cord Installation using
Strain Relief Supplied
(See Figures 3.1 and 3.2)
1. Remove the
Terminal Block Access Plate
on the back of the
range by unscrewing the 4 fixing
Screws
.
2. Insert the
Power Cord
through the
Bracket
; then tighten the
Power Cord
by using the
Strain Relief
. Allow enough slack
to easily attach the cord terminals to the
Terminal Block
.
3. Remove the 3 wire terminal nuts and washers from the
Terminal Block
.
4. Plug the terminal holes of
Power Cord
. The
Neutral or
Ground Wire
of the
Power Cord
must be connected to the
neutral terminal located in the center of
Terminal Block
. The
Power Wires
must be connected to the outside terminals.
5. Plug washers and tighten nuts securely.
Do not remove
Ground strap
.
6. Assemble the
Terminal Block Access Plate
.
Terminal Block
Access Plate
Screws
Neutral Wire
Power Wires
Bracket
Power Cord
Terminal Block
Ground strap
Strain Relief
Neutral Wire
Power Wires
Bracket
Power Cord
Terminal Block
Grounding Wire
Strain Relief
Cut Ground Strap
Grounding Screw
Fig. 3.1
Fig. 3.2
Fig. 3.3
